BZCMP - SBS GLASS FR
- MSDS: BZCMP
- Manufacturer: FIRESTONE BUILDING PRODUCTS CO
- Product Name: SBS GLASS FR
- National Stock Number: 6850-00F047226
Product Identification
Product ID:SBS GLASS FR
MSDS Date:06/19/1995
FSC:6850
NIIN:00F047226
MSDS Number: BZCMP
Responsible Party
CARMEL, IN 46032-5000
US
Emergency Phone: 615-231-3911/317-575-7190
Info Phone: 615-231-3911/317-575-7190
Cage: FIRES
Contractor
Telephone: 615-231-3911
Cage: FIRES
Ingredients
ASPHALT FUMES, ASPHALT, CUTBACK ASPHALT (IARC CARCINOGEN
CAS: 8052-42-4
RTECS: CI9900000
Fraction By Weight: 34%
ACGIH TLV: 5 MG/CUM
CALCIUM CARBONATE, DOMOLITE, LIMESTONE, WHITING *96-1*
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 19.3%
ACGIH TLV: 10 MG/CUM (DUST)
SILICON DIOXIDE, CRYSTALLINE QUARTZ, SAND (ANIMAL CARC,
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 5.2%
OSHA PEL 0.1 MG/CUM RESP DUST
ACGIH TLV: 0.1 MG/CUM RESP DUST
FIBROUS GLASS
Fraction By Weight: <2%
TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 6.4%
OSHA PEL 2 MG/CUM (RESP DUST)
ACGIH TLV: 2 MG/CUM (RESP DUST)
NON-HAZARDOUS INGREDIENTS
Fraction By Weight: >33.1%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:CAUSES A MECHANICAL IRRITATION. FUMES
GENERATED BY MOLTEN ASPHALT MAY CAUSE EYE, SKIN & RESPIRATORY TRACT
IRRITATION. MOLTEN ASPHALT WILL CAUSE THERMAL BURNS.
PROLONGED/REPEATED EXPOSURE TO CRYSTALLIN E SILICA CONTAINING DUST
CAN RESULT IN INJURY TO THE LUNGS (SILICOSIS).
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION & BURNS. SILICOSIS: SHORTNESS OF
BREATH, DECREASED EXPANSION OF THE CHEST, DRY COUGH, FATIGUE,
DYSPNEA, CYANOSIS, LOSS OF APPETITE, PLEURITIC PAIN, DECREASED WORK
CAPACITY.
First Aid
First Aid:EYES: WASH W/GENTLE STREAM OF WATER UNTIL FOREIGN MATERIAL IS
REMOVED. INHALATION: REMOVE TO FRESH AIR & TREAT SYMPTOMATICALLY.
SKIN: FOR THERMAL BURNS, FLUSH AREA W/COLD WATER. OBTAIN MEDICAL
ATTENTI ON IN ALL CASES.
Fire Fighting
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR IMPERMEABLE PROTECTIVE CLOTHING & SCBA AS
TOXIC FUMES & VAPORS MAY BE EVOLVED.
Unusual Fire/Explosion Hazard:COMBUSTION OF THIS PRODUCT PRODUCES DENSE
BLACK SMOKE.
Accidental Release
Spill Release Procedures:NONE REQUIRED
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
FLAMES. CARE SHOULD BE TAKEN TO MINIMIZE THE AMOUNT OF DUST
GENERATED WHEN APPLYING/HANDLING THIS PRODUCT.
Other Precautions:THE AMOUNT OF DUST GENERATED WHILE HANDLING THIS
PRODUCT IS EXPECTED TO VARY DEPENDING ON THE USER'S APPLICATION.
USE IN WELL VENTILATED AREA.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED DUST, MIST & FUME RESPIRATOR
IF EXPOSURE MIGHT EXCEED THE PEL/TLV.
Ventilation:REQUIRED
Protective Gloves:LEATHER/COTTON FOR DIRECT HANDLING
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:NONE RECOMMENDED
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:NONE
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK MAT W/SAND & CERAMIC COVERED SURFACE
W/ASPHALT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES & OTHER IGNITION
SOURCES.
Hazardous Decomposition Products:COMBUSTION PRODUCTS: CO2, CO &
PARTIALLY BURNED CARBON.
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.